The NXT 110 Aerial lets your team reach maximum and unrestricted performance with up to a 750-pound tip load. The low-profile pump and short overall length deliver unprecedented maneuverability without sacrificing compartment space or performance. The NXT 110’ Aerial is a compact yet mighty ladder. With a 110’ vertical reach and 99’ Horizontal reach, 12’ and 14’ narrow outrigger spread, superior grade performance, 2,250 GPM fire pump, 1,500 GPM aerial water flow capacity, greater control and stability, independent front suspension, pump operator’s panel, 110’ Aerial water monitor, and more!
The heavy-duty 55’ Rear Mount Ladder combines a maneuverable, single-axle configuration with an elevated master stream that lets you do the work you need to do. This ladder is a great ladder that is sure to increase your department’s productivity. Equipped with the electronic positional waterway, CP-84 chrome Plated Waterway, QL-12 electrical system, hot dip galvanized stabilizer beams, removable egress, AL-11 aerial logic, ergonomic hose lead (EHL), aerial wheel well storage, LED rung lights, and more!
Available on a single or tandem axle, the 75’ Rear Mount Ladder is designed to be the main event of your aerial attack and rescue operations. Built with 100,000 psi yield strength steel, all configurations have been designed to deliver exceptional compartment storage with a short wheelbase for better maneuverability. It is equipped with an FP-4 stabilizing system, electronic positional waterway, CP-84 chrome-plated waterway, QL-12 electrical system, removable egress, ergonomic hose load (EHL), AL-11 aerial Logic, smart aerial storage, joystick controls, and more!
The 75’ Rear Mount ladder is compact and maneuverable and is mounted on a single rear axle, designed to deliver excellence during the most demanding urban and suburban environments. It is equipped with a versatile outrigger system, ladder slide pads, clean climb, 75’ aerial water monitor, 3-section aerial ladder, 66’ Horizontal reach, 75’ Vertical reach, up to 500 lb. tip-load while flowing 1,500 GPM unrestricted, waterway controls, and more!
The 100’ Rear Mount Ladder is based around a 105’ aerial structure. However, Spartan has taken off 5’ of the overall height (thanks to lower aerial side rails), allowing you to travel safely under bridges, overpasses and more! Equipped with the FP-4 Stabilizing system, 100’ vertical reach, 97’ horizontal reach, CP-84 chrome-plated waterway, QL-12 electrical system, removable egress, AL-11 aerial logic, joystick controls, ergonomic hose load (EHL), 500 lb. Tip-load dry/wet unrestricted, LED rung lights, and more!
The 105’ Rear Mount Ladder is known for its robust design. The Ladder is configured with a unique outrigger design that allows your department to use total operational capacity on a 12-percent grade, both downhill and uphill. It is equipped with the FP-4 Stabilizing system, electronic positional waterway, CP-84 chrome-plated waterway, QL-12 electrical system, 750 lb. Tip-load dry/wet unrestricted, AL-11 aerial logic, 105’ vertical reach, 101’ 5” horizontal reach, ergonomic hose lead (EHL), and more!
The 110’ Rear Mount Ladder is engineered for a narrow stabilizer allowing for easier positioning and faster setup on narrow streets and tight access areas. Its horizontal reach is an impressive 99’ reach, the best in its industry. Equipped with a clean climb, safe and easy access (wide egress steps), 110’ vertical reach, 99’ horizontal reach, waterway controls, 110’ aerial water monitor, 11’ 7” standard travel height, and more!
The 121’ Rear Mount Ladder has a robust ladder that has the longest horizontal reach available of 121’ at 0 degrees to make short work of a large setback. The Ladder ensures you can handle below-grade rescues as well as high-rise firefighting and rescues. It is equipped with the FP-4 stabilizing system, electronic positional waterway, CP-84 chrome-plated waterway, QL-12 electrical system, removable egress, AL-11 aerial logic, 750 lb. Tip-load dry/wet unrestricted, SGO9 auxiliary Unit-EMISSION-Reduction technology, 125’ vertical reach, 121’ horizontal reach, and more!
Safety, functionality, and serviceability maximize your reach in the 85’ Mid Mount Platform. The smooth operations of the aerial platform, even at low angles of elevation and a fully extended platform, will increase your department’s productivity. Equipped with the FP-4 stabilizing system, CP-84 chrome-plated waterway, AL-11 aerial logic, joystick controls, QL-12 electrical system, LED rung lights, Bi-fold platform doors, parapet ladder attachment, platform levelling system, -12° to 72° angle of elevation, 1000 lb. dry/ 500 lb. wet unrestricted, 18’ stabilizer spread, and more!
The 93’ Mid Mount Platform ladder tower provides an advantage from every angle. Easy Maneuverability and set-up capabilities in urban environments, the mount platform can get you where you need to go no matter how narrow the access areas are. It is equipped with spacious platform working areas, angled platform corners, platform access gates, sliding platform controls, wide scrub area, integral torque box, wide, unobstructed aerial walkway, 93’ Mid Mount platform outrigger system, obstruction detection system, low clearance, minimal platform overhang, 93’ vertical reach, 88’ 6” horizontal reach, 1000 lbs. Dry/500 lbs, -10° to 78° angle of elevation, and more!